overview for InFerNo

I have a SMB share on a computer. It's set to anonymous access, meaning I don't have to enter a password to access the shares. All my PC's at home are Linux so this has served me for many years. I now have a Windows 11 laptop from work that refuses to connect to this device. The message it gives me is you can't access this shared folder because your organization's security policies block unauthenticated guest access

I have tried adding a new share that requires authenticated access, but Windows keeps giving the same error.

I have changed the protocol settings to be higher, but they had no effect. Here is my current config:

#======================= Global Settings =====================================
[global]

	protocol = SMB3_11
	client min protocol = SMB3
	client max protocol = SMB3_11

	workgroup = REDACTED.HOME

	server string = SAMBA

	map to guest = bad user

	hosts allow = 192.168.1. 127.

	printcap name = /etc/printcap
	load printers = no

	log file = /var/log/samba/%m.log

	max log size = 50

	security = user

#============================ Share Definitions ==============================
[smbshare]
   path = /mnt/share
   public = yes
   only guest = yes
   writable = yes
   browseable = yes
   create mask = 0777
   directory mask = 0777
   printable = no
   guest ok = yes

[smbshareauth]
   comment = Authenticated share
   path = /mnt/share
   read only = no
   public = yes

This config still works for my anonymous share on my Linux machine, but (still) not on Windows 11 with the authenticated share. Removing the anonymous share from the config and leaving only the authenticated share does nothing for Windows 11, still same error.

Protocol before was

	protocol = SMB3
	client min protocol = SMB2
	client max protocol = SMB3

I tried to connect to \\192.168.1.5\smbshareauth but that gives the above error. Help is greatly appreciated!

9

Button to invert image colors (lemmy.ml)

submitted 1 year ago by InFerNo@lemmy.ml to c/jerboa@lemmy.ml

7 comments fedilink

I would love to have a button on images in Jerboa that would completely invert the colors of an image. My retinas keep getting burned when I'm opening a post on my dark themed phone that is of a white image with text. It would be great to be able to view/read the image this way.

PS double tapping an image zooms it in waaaay too far. It should zoom to 100% size. My biggest pet peeve when trying to enlarge images.

24

Time management tools in GNOME (lemmy.ml)

submitted 1 year ago* (last edited 1 year ago) by InFerNo@lemmy.ml to c/linux@lemmy.ml

3 comments fedilink

Has there been any mention of time management tools getting built in into GNOME? I thought I read something a short while ago that would land in one of the next versions, but I can't seem to find anything about it anymore. It had some sort of pomodoro timer as part of it and I thought it was a neat feature to look out for. Can't seem to find it anymore though. Perhaps it was a GNOME Circle post?

49

Need to clone 16GB partition on 128GB disk to 32GB disk (lemmy.ml)

submitted 1 year ago* (last edited 1 year ago) by InFerNo@lemmy.ml to c/linux@lemmy.ml

20 comments fedilink

I'm not coming up with a lot of useful (clear) results when searching for a solution to this issue.

Is it OK to simply dd the 128GB disk to the 32GB disk using count to stop after the 16GB partition was cloned?

A bit more context: I had to clone a 16GB eMMC and only had a 128GB SD around. Now I purchased a 32GB eMMC and want to clone it again. The partition holds a root filesystem for an ARMv8 device. I don't have the 16GB eMMC anymore, that would have been the easy way out.

1

DNS (systemd-resolved) not working on Arch Linux ARM (lemmy.ml)

submitted 2 years ago* (last edited 2 years ago) by InFerNo@lemmy.ml to c/archlinux@lemmy.ml

0 comments fedilink

I'm trying to troubleshoot this DNS I have on a small old Odroid C1 board.

I have set up a static IP, but cannot get DNS to work. The image comes with systemd-resolved by default. I have notes that said to set a static IP, then disable systemd-resolved, and after a reboot the DNS would work, but that didn't work. I've looked into systemd-resolved a little bit, and have configured the DNS servers manually, which is required when using a static address.

My gateway is also my DNS.

Here is what I believe to be relevant output:

/etc/systemd/network/eth0.network:

[Match]
Name=eth0

[Network]
Address=192.168.10.44/24
Gateway=192.168.10.254
DNS=192.168.10.254
DNS=1.1.1.1

Output of resolvectl status and some pings:

[root@alarm alarm]# resolvectl status
Global
       LLMNR setting: yes
MulticastDNS setting: yes
  DNSOverTLS setting: no
      DNSSEC setting: allow-downgrade
    DNSSEC supported: yes
  Current DNS Server: 1.1.1.1
         DNS Servers: 192.168.10.254
                      1.1.1.1
Fallback DNS Servers: 1.1.1.1
                      9.9.9.10
                      8.8.8.8
                      2606:4700:4700::1111
                      2620:fe::10
                      2001:4860:4860::8888
          DNSSEC NTA: 10.in-addr.arpa
                      16.172.in-addr.arpa
                      168.192.in-addr.arpa
                      17.172.in-addr.arpa
                      18.172.in-addr.arpa
                      19.172.in-addr.arpa
                      20.172.in-addr.arpa
                      21.172.in-addr.arpa
                      22.172.in-addr.arpa
                      23.172.in-addr.arpa
                      24.172.in-addr.arpa
                      25.172.in-addr.arpa
                      26.172.in-addr.arpa
                      27.172.in-addr.arpa
                      28.172.in-addr.arpa
                      29.172.in-addr.arpa
                      30.172.in-addr.arpa
                      31.172.in-addr.arpa
                      corp
                      d.f.ip6.arpa
                      home
                      internal
                      intranet
                      lan
                      local
                      private
                      test

Link 2 (eth0)
      Current Scopes: DNS LLMNR/IPv4 LLMNR/IPv6
DefaultRoute setting: yes
       LLMNR setting: yes
MulticastDNS setting: no
  DNSOverTLS setting: no
      DNSSEC setting: allow-downgrade
    DNSSEC supported: yes
  Current DNS Server: 1.1.1.1
         DNS Servers: 192.168.10.254
                      1.1.1.1
[root@alarm alarm]# ping google.com
ping: google.com: Name or service not known
[root@alarm alarm]# ping tweakers.net
ping: tweakers.net: Name or service not known
[root@alarm alarm]# ping 192.168.10.254
PING 192.168.10.254 (192.168.10.254) 56(84) bytes of data.
64 bytes from 192.168.10.254: icmp_seq=1 ttl=64 time=0.329 ms
64 bytes from 192.168.10.254: icmp_seq=2 ttl=64 time=0.243 ms
^C
***
192.168.10.254 ping statistics
***
2 packets transmitted, 2 received, 0% packet loss, time 999ms
rtt min/avg/max/mdev = 0.243/0.286/0.329/0.043 ms
[root@alarm alarm]# ping 1.1.1.1       
PING 1.1.1.1 (1.1.1.1) 56(84) bytes of data.
64 bytes from 1.1.1.1: icmp_seq=1 ttl=58 time=22.3 ms
64 bytes from 1.1.1.1: icmp_seq=2 ttl=58 time=14.3 ms
^C
***
1.1.1.1 ping statistics
***
2 packets transmitted, 2 received, 0% packet loss, time 1002ms
rtt min/avg/max/mdev = 14.258/18.280/22.302/4.022 ms

Alternatives to systemd-resolved welcome, just need it to work.

edit:

The solution was to add DNSSEC=no in /etc/systemd/resolved.conf. I learned this by running journalctl -u systemd-resolved -f, which said DNSSEC validation failed for question google.com IN A: failed-auxiliary.

1

Software management for Windows Server (lemmy.ml)

submitted 2 years ago by InFerNo@lemmy.ml to c/sysadmin@lemmy.ml

0 comments fedilink

I have 15 VM's running for clients and I'm looking for a way to keep the tools up to date without having to connect to each server and do it manually. A few examples are WinDirStat, Firefox, SSMS, Filelocator, etc.

We have expanded recently and I'm at the limits of doing this manually. These servers are not domain joined and are in separate virtual networks.