One trick for a better fingerprint recognition is to set 2+ fingers but scan only one finger for all of them.
This may or may not also increase the likelihood of someone else succesfully unlocking your phone with their own fingerprint.
I finally made a full switch from Sync to Thunder, because even though I know that Sync dev does take huge breaks and he comes back and fixes everything and makes the app even better, I still wanted to make sure I find a good alternative and get familiar with it just in case.
Thunder is a really good app, especially considering its age. It also has the most features and the nicest UI (IMO) among the Lemmy apps. And it being open source is a huge plus too.
Sync is still my favorite, it just feels really nice to use, but I'll stay on Thunder for now.
Voyager is also a really nice app that feels polished and works smoothly, but it's lacking certain features that I like. So I keep it installed as a backup but I don't use it often.
I kinda started using lemmy less lately. I shall fix that!
That's cool! What software are you using for drawing/animation?
ShizuTools allows you to run ADB command through intents, which means that you can use Tasker (or other similar app) to run the ADB reboot command. I tested this part and it works.
The problem is that you would need to start Shizuku manually after each restart.
Searching TaskerNet for shizuku, I was able to find some projects that can start shizuku for you, although I haven't tried them out.
So, it does seem possible, but with quite a bit of setup.
Thank you, good to know!
Yeah, thats pretty much how I used it, it's almost always almost full haha.
So what are some things you can do to make sure your SSD lasts longer?
smartctl 7.4 2023-08-01 r5530 [x86_64-w64-mingw32-w10-1809] (sf-7.4-1)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Crucial/Micron Client SSDs
Device Model: CT500MX500SSD1
Serial Number: 1947E228658A
LU WWN Device Id: 5 00a075 1e228658a
Firmware Version: M3CR023
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
TRIM Command: Available
Device is: In smartctl database 7.3/5528
ATA Version is: ACS-3 T13/2161-D revision 5
SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Tue Dec 24 19:50:16 2024 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 30) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x0031) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 100 000 Pre-fail Always - 52
5 Reallocate_NAND_Blk_Cnt 0x0032 100 100 010 Old_age Always - 1
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 10304
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 2050
171 Program_Fail_Count 0x0032 100 100 000 Old_age Always - 0
172 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 0
173 Ave_Block-Erase_Count 0x0032 033 033 000 Old_age Always - 1007
174 Unexpect_Power_Loss_Ct 0x0032 100 100 000 Old_age Always - 84
180 Unused_Reserve_NAND_Blk 0x0033 000 000 000 Pre-fail Always - 35
183 SATA_Interfac_Downshift 0x0032 100 100 000 Old_age Always - 0
184 Error_Correction_Count 0x0032 100 100 000 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
194 Temperature_Celsius 0x0022 060 036 000 Old_age Always - 40 (Min/Max 0/64)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 1
197 Current_Pending_ECC_Cnt 0x0032 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0
202 Percent_Lifetime_Remain 0x0030 033 033 001 Old_age Offline - 67
206 Write_Error_Rate 0x000e 100 100 000 Old_age Always - 0
210 Success_RAIN_Recov_Cnt 0x0032 100 100 000 Old_age Always - 52
246 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 113337679297
247 Host_Program_Page_Count 0x0032 100 100 000 Old_age Always - 1924011672
248 FTL_Program_Page_Count 0x0032 100 100 000 Old_age Always - 13464223382
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Completed [00% left] (0-65535)
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
The above only provides legacy SMART information - try 'smartctl -x' for more
So, I have Crucial MX500 SSD, and on their spec sheet, the SSD Endurance TBW is 180TB
Crystal Disk Info says the health is at 33% Health, despite Total Host Writes being 54039 GB (30% of specified SSD endurance TBW of 180TB)
So is their specified endurance wrong, is the Total Host Writes data in Crystal Disk Info misleading or wrong, or is there more things that go into determining the "health" of an SSD besides Total Bytes Written? Or could it be that I mistreated the SSD causing its health to get worse?
This one is spectacular
Just noticed that unlike mastodons join page, lemmy doesn't have a "join" or "create an account" button. It'd be nice to have one, it would be more straightforward to join.
Or perhaps there is a reason why it doesn't exist?
Added an initial Anti-Cheat detection system. When a user is detected as cheating, during the game session the opponents will be given a choice between banning the user immediately and ending the match or turning the cheater into a frog for the rest of the game and then banning them afterwards. The system is set to conservative detection levels as we work on a v2 anti-cheat system that is more extensive. We will turn on the banning of users in a couple of days after the update is out. When a match is ended this way, the results will not count for other players.
view more: next ›
I fixed my keyboard by taking a single wire strand and just taping it with a piece of clear tape. It's been working without any issues for more than a year xD