Jimmycrackcrack

It's way cheaper than the app store and Steam and Humble Bundle

This used to be an option, now it isn't. I found command line solutions which would be fine, but they're all for scheduling sleep for set times, I want set durations.

When this feature first came out I immediately disabled it because I noticed you couldn't stretch windows across two screens. I thought I might try putting up with it, but at the time I found it made it damn near impossible to use Avid Media Composer effectively.

It's been disabled in all the years since and I've never thought about it since until just recently where now twice in one month I've come across situations where something only works if it's enabled. One is for disabling the behaviour where fullscreening a video makes a second monitor turn black and now with Sequoia, the ability to use the native window tiling they just introduced.

I've always used magnet and then later rectangle to achieve the same and will probably just revert but I thought I'd try and give the native option a shot. I checked to see if that stupid shit with not being able to span windows has been fixed in the intervening period but it hasn't. Does anyone know if you can make it work with separate spaces enabled or at least why it works this way?

I don't really buy games much these days. I was trying to see what games would work on Mac and was pleased to see a new Assassin's Creed game is coming out on Mac natively. I was pretty stoked with this news, I've never played any of the AC games but they've always looked good.

I thought I'd check the Apple App Store to see if there were any other AC games that might already be out and there was only one option (actually on some 'App Store Preview' thing not the actual app store), called Assassin's Creed Mirage. It was listed as free to play with in-app-purchases. I'm really just not participating in that, can't stand that shit. I don't think I've actually bought any Ubisoft games since the Nintendo 64, are they all like this or is that just some unfortunate anomaly? I noticed also that it'd listed them collecting data about me, which, WTF?

Keen to wait till November for AC Shadows but not if it's going to be any of that nonsense.

I love that game and it's the best RTS I've played. It seemed to basically rip off the CIV games heavily but simplify them and put them in an RTS context. Everything I loved about Age of Empires as a kid but much better and also spanning the ancient age to the information age.

I run an M2 max mac, which makes things complicated, but I'm open to jumping through some hoops if such hoops exist to make something that wasn't supposed to work on Mac, work on Mac, but would need to know if it even can be done for that particular game. Also obviously direct compatibility out of the box would be great.

I really don't want anything that's multiplayer only, as I'm unlikely to ever play online and prefer single player games

I really hate free to play games and just want to buy the game in its finished state outright that will stay the same for as long as I own it and then just pay for any expansions or new additions at my discretion if they get released.

I'd like it to have the same all of history spanning scope for tech.

I like there to be air units and navy units.

Or could you write a virus or trick someone in to do doing just that? When did thermal throttling first become a thing for that matter?

I recently bought an external PCIe enclosure so I could make use of a specific PCIe device in an editing setup. One of the nice things about this particular enclosure is that it also happens to come with an m.2 slot for NVME drives as well.

Usually when I edit with my home set up, I'm provided with the storage by the client, and even if not, at the very least, video media, plus backups takes up a lot of room and NVME drives are expensive so I'd usually opt for something cheaper as the actual location for the footage and assets. I figured then that it might be take advantage of an NVME drive of a smaller, more affordable capacity and use it just as a location for video render cache that I just clear after every project wraps. The high speeds of these drives seems like it would be a good fit for this purpose.

However I've heard that SSDs, including NVME are famously short lived and have particularly short life spans in terms of number of write operations. Is that still the case and would the constant writing and clearing of relatively small video files actually be kind of the worst use of one of these drives?

My understanding between TB4 and TB3 is that they're essentially the same, it's just that the standard of TB4 essentially mandates that the device must do all that TB3 maybe could do. Minimum bandwidth is increased and I think I read something about power delivery minimums as well. This eGPU chassis I bought came with it's own TB4 cable, which is actually the first Thunderbolt cable I've seen that specifically says "4" on it.

I assume the reason they supplied this is because, given what it does, an eGPU chassis is going to need to support some pretty bandwidth for a GPU. In my case though, I'm actually using this chassis not for a balls to the wall kick ass Graphics card, but actually to allow me to attach an old and very humble i/o card from Blackmagic. It's currently working just fine for that purpose.

Thing is, the supplied TB4 cable is pretty short and the chassis along with the ATX power supply mounted on it makes for a pretty hefty desk-space consuming setup. I'd like to move the whole setup somewhere fairly far off from the laptop to save me some precious desk space. I looked up 2m thunderbolt 4 cables which I understand is the longest distance you can get for TB4 and still maintain bandwidth and while it's not too bad, the prices are high for a cable. It occurs to me though that since I'm barely using a fraction of the available bandwidth anyway, could I use other, cheaper, long cables. USB4 comes up a lot in my search for 2m TB4 cables for example. (although they are mostly from AliExpress so don't know how good an idea it is to buy from them). If the chassis has TB4 controllers in it, as does the laptop to which it's attached, can one just put a USB4 cable between them? Are they physically different?

For that matter, since my bandwidth needs are so tiny, could I just find cheaper, longer TB3 cables?

I don't know my terminology very well. I just bought this eGPU enclosure. It also comes with an m.2 slot I suspect that's probably what this 4 pin power slot is for.

I have a spare ATX PSU to power this thing with and it's not modular, the cables come out of the PSU box in a big messy bundle and there's no where to detach or attach cables. There's lots of different connectors that come out of this bundle but alas no square arrangement of 2 rows of 2 pins as needed by this chassis.

There are however 2 such connectors that are kind of joined together through a little plastic catch, but in a manner where you can slide them apart. It's clearly intended that you can be able to separate these if you want to, but them being attached to each other in the first place has me a little worried.

The cable from which they each branch has TKG written on it and each of the connectors has L and R printed on it respectively. If I separate them, I can definitely fit one in to the slot, but is there any reason one shouldn't do this?

UPDATE: It works!! Initially the chassis wouldn't power on but I discovered that if I simply don't plug in the 4 pin slot at all then it does. I'm pretty sure that slot is for powering an m.2 drive if you have one and that was one of the things that made me decide to buy this particular chassis so it doesn't look great but I'm hoping that if I actually had an m.2 drive to test it with, that plugging in that PSU connector to the 4 pin slot would work, but at the moment, when there is no such drive connected, the entire chassis doesn't power on. Even better still, the blackmagic card works!! This is great because the manufacturer actually responded to my email asking if it would work too late and I had already ordered it and they said it wouldn't work so the fact that it does is a big relief. Word of advice for anyone testing this with standard computer monitors instead of proper reference monitors like me, it might say "out of range" or similar on your monitor for a lot of standard video frame rates, but for testing purposes, I was able to get it to work at 60p. No good for a real project, but hopefully with a real reference monitor that wouldn't be an issue.

Asking on another's behalf. I don't want to give too many details including the car make and model.

This person's new car has the ability for you to 'start' it and also 'turn off' when you finish the journey. It's confusing what the turn off really means. It keeps lights on for some time after you disembark the vehicle whether you want it to or not, and if you open a door it turns on the instrument cluster screen to display a diagram of the car with a door being opened. You can also turn on the infotainment screen and access some but not all options. The manual has some warning about not plugging things in when the car is off as it could drain the battery.

Is there some physical state the high voltage battery is in when the car is 'started' that's different to the state it's in when it's 'off'? Does it have some effect on wear when the battery cycles between those states too often?

This issue came up when they were thinking of buying a dash cam. The dashcam was designed mainly for ICE vehicles and has a feature called 'park mode' where the camera can be in a kind of standby off state while a vehicle is parked and the car engine is off, but can switch itself on if it detects some kind of movement or impact like if someone drives into your parked car. The dashcam website has some warning saying that for EVs, you should buy a separate battery pack for it because this 'parked mode' doesn't work if the dashcam is installed hard wired in to an EV. This is confusing because the 12v battery should always be accessible regardless of the car's "on/off" state and I would have thought worked just like it does in an ICE car, whereby the camera continues to draw some small amount of power to power the standby mode and allows the maximum power draw the camera could need if the camera is triggered by an impact. In ICE cars, this usually only works when something is hardwired because somehow the cigarette lighter outlet doesn't work without the engine running, (I guess by design so you don't drain the battery with accessories and can't start?) but it sounds like from the manual in this EV it continues to work whether the battery is considered "on" or "off" but conversely somehow if you hardwire an accessory to it doesn't?? It's unclear as well whether that means the dashcam's park mode would work if you plug it in to the cigarette lighter outlet of the EV rather than hardwiring, or if it just doesn't work in EVs no matter what you do and requires its own battery, which seems unlikely but is not spelled out anywhere.

I have sequential downloads enabled on my torrent client, I have a download speed that is fast enough that the ETA for the full download of the media is shorter than the duration of the media itself, and I can watch it in IINA or VLC, but, unfortunately Jellyfin doesn't recognise any new media in my designated library folders until a decent amount of time AFTER the entire file is downloaded and has it's correct extension.

Is there some way to watch as one downloads using Jellyfin?

I occasionally do some paid editing work in my home suite. I use a MBP and I just use whatever storage I have left on external drives or buy new ones as the project budget permits. Most of the time, my work is done on-site using a production company's facilities so it's not a big time operation here at home.

I also like to download and watch video over my wifi to to TV or my phone in other rooms of the house (don't typically move the laptop much). I tend to use the laptop's internal drive for that.

I'm beginning to outgrow my storage for both purposes, but only just. I could continue as I am for quite some time, deleting media at home after I watch it, and buying physically fairly small drives to put away in cupboards for work. However, I'm thinking I could fix both storage needs for a very long time by spending a bit bigger (but not MUCH), and getting a proper RAID. My mind immediately went to NAS, but it occurs to me that, that mightn't necessarily be the most cost effective or efficient way to go given the limited scope of my needs.

My home network is very slow consumer equipment, and I have no ethernet infrastructure at all. I thought I could maybe just hook the NAS up to the laptop via ethernet but then at that point, isn't that just DAS with the extra complications of networking? Would I need a switch between the 2? My home streaming is just done over wifi, since everything is compressed media anyway.

If I buy a decent thunderbolt DAS RAID and expose it to the wifi network via the laptop, would the costs stack up in terms of power consumption and wear and tear of the expensive lappy (given it'd be powered on nearly constantly)? Are there NAS devices that I can directly attach to the lappy for editing, but leave on and connected to wifi for home streaming? Would it need any additional networking equipment in that use case? Can I run jellyfin on it? I feel like a NAS doesn't make sense but would like help puzzling this out.