AnotherMadHatter

Close. The good ones are separated and usually sold in smaller lots by manufacturer, and go for a lot more (as you would expect) than these.

Here is a 25lb lot of Swiss Army Knives that is at $900 with 3 hours to go.

https://www.govdeals.com/asset/38413/8445

If they are really valuable and think they will get more than $100 or so, they sell them individually.

Huh. I've only heard about it once or twice. I guess I'll have to check it out. Thanks.

If you want them to look like they just came out of the factory, get an ultrasonic cleaner and the degreaser concentrate. I bought one a while back and decided to clean some 1/10 scale RC car parts in it since I was trying to get all the grease out of the nooks and crannies and even a toothbrush was having a difficult time with it.

The parts came out looking brand new, like I had just pulled them out of their original packaging.

Yeah. It's not like I buy a lot, it's just another place to do some mindless scrolling. But it's irritating nonetheless. I have sold stuff before, and it went pretty much how you described it - almost not worth it in the end.

Bummer. Guess I'll have to see what Craigslist is looking like nowadays. I haven't been there in a couple of years.

**Edit: ** Found it. https://hackaday.com/2020/09/23/reforming-3d-prints-with-salt-and-heat/

There is an article out there somewhere in the ether where someone printed with 100% infill, then put the print in a glass container and packed it with salt that they had pulverized with a coffee grinder into a powder and re-melted / fused it. Their intent was for making clear parts since they were using transparent filament, but it should be great for increasing the adhesion of the layers as well. Ideally, it would become more of a monolithic plastic part than a bunch of layers.

If you are talking about the Core One, here is the connectivity of it from the Prusa website:

"Prusa CORE One is equipped with a LAN port and a detachable Wi-Fi module (Wi-Fi can be set up a with an NFC tap). It integrates seamlessly with both Prusa Connect and Prusa App, so you always have a complete overview of your printer. However, the printer can be operated in a full offline mode without any compromise. You can even flash the firmware from a USB drive."

https://www.prusa3d.com/product/prusa-core-one/

I love my Prusa printers, but I am not a "fanboy" from the standpoint of shitting on any other printer that is not a Prusa. It's just that I like them and keep buying them.

I think Bambu printers bring a lot of features to users at a really low price compared to any other manufacturer.

Love my Prusa XL. Bought the single head and have been having fun with it. Bought a second head for my Christmas present and have been playing with two color prints.

Printed some colorful lizards for my mom.

If you do not have a 3D printer and CAD software, you are 100% right.

If you already have those things like OP, then why not just design / print one? I am also a 3D printer / CAD person, and I love designing replacement parts that are wither too expensive, or often impossible to find. Mostly though, I design and print things that make my and my families lives easier / nicer / more convenient. And they are customized to the exact item and function, something that you would most likely never be able to get in a store or online.

Stove Knob guards. https://www.printables.com/model/278668-stove-knob-guard

Salt / Pepper Grinder Holder. https://www.printables.com/model/155219-salt-and-pepper-grinder-caddy

Spice Jar Organizer. https://www.printables.com/model/151171-spice-jar-spacer-organizer

Just to name a few things.

Yeah, we had a different stove when our kids were small, and it had the knobs at the back of it.

I think some newer stoves will automatically shut off after a certain amount of time when the gas is on but no flame is detected.

You push the knob in and turn it. The guard goes around the knob, but doesn't stop it from turning.