hereiamagain

We've never been on a trip before, we booked a roomette to Tucson once before, but missed our train because an employee looked at our ticket and told us to sit and wait for him to call us. He never did and our train left, then he was very rude, convinced us to cancel our ticket (which was the wrong advice). It's a long story, needless to say, we got our money back, plus repayment for last minute flights (we needed to be in Tucson), plus this voucher for another trip.

The trip can be any time of the year next year, not February, March or April. Assuming summer is best?

The plan is to ride out west somewhere, California? And then rent a car to road trip home. It'll be the first and probably only time we can afford something like this, so we wanna make it count. It might make more sense to drive out and train back? But... I worry about missing the train... Again.. no no, we're leaving from Chicago.

I know some routes are better than others, and I know they change sometimes, what they're offering, what they used to offer, etc.

We'd like a roomette, and we wanna see the sights in one of those glass roof cars, and I know the food options vary too, so whatever the better of the food options would be ideal.

Bonus points if you have suggestions of things to check out on our way back east. We've never been out west before, besides Tuscon. Maybe see the Sequoias? Grand canyon? We like backpacking so the return trip will probably involve some car camping, or real camping, for the fun of it.

Thanks!

Go with me here. Routers are routers, and servers are servers. Some people mix and match things, but generally, ideally, this is how it goes. And I agree.

But the router I just set up, the Google WiFi, has 4gb storage, 512mb of ram, a quad core CPU at 800mhz, is easy to flash, and only costs $10-15 on eBay all day long.

If you used it as only a little computer, no routing.. Then..

If I wanted to say... Set up a tailscale node at my family's house. Why spend $45-80, or even $130(!) on a raspberry pi with an Ethernet port, when the Google WiFi works just as well if not better for that job?

Maybe a tiny matrix server? Tiny web hosting?

Or, for a less ideal solution, but still reasonable. What if I wanted to set up a remote backup node for my main server? If my needs were small enough, the Google WiFi would be much more economical, although you'd need to add a USB hub to break out the USB ports. And there would be limitations obviously.

Or getting really crazy, you could potentially squeeze one or two bigger services onto a router, just to see if it's possible.. Minecraft server?

My question is. What is the best device for this? The Google WiFi is dirt cheap at $10-15, I'm about to pull the trigger on a second one just to play with. But I wanted to see if you guys had any other suggestions?

I tried searching the toh for similar devices, but even restricting it down every way I can think of, I've still got over a hundred devices to look at.

Basically, I think older router hardware is an overlooked, cheaper alternative, to raspberry pis, for some scenarios.

I'm old school, the last router firmware I touched was ddwrt on a 54g. These days it seems openwrt is the way to go.

I've got an old Google WiFi that I just flashed over. I have a small managed switch in the mail. I want to play with VLANs. With only one lan port I'll need to do trunking.

I've watched the videos, read some docs, I'm still trying to wrap my head around it.

Right now I'm stuck on the idea that my router model might not even support it? I can't find where I read that, but now I'm all turned around.

I'll play with it when the switch arrives, surely I'll figure it out eventually. but in the meantime, does anyone know if the Google WiFi router supports VLANs when flashed? Or is that a problem I made up?

Thanks!

Edit: update, VLANs up and running! Still need to tweak the isolation, but this is very cool tech.

Location of the tree is roughly the middle of the lower peninsula of Michigan.

cross-posted from: https://sh.itjust.works/post/46601463

Swing your legs out one side, stand on stones. The other side? Stand in water 😅

Usually you wouldn't camp so close to water, but this was such a cool spot I couldn't help it. Plus it was on a fairly busy trail, in good weather, so.. 🤷‍♂️

cross-posted from: https://sh.itjust.works/post/46601463

Swing your legs out one side, stand on stones. The other side? Stand in water 😅

Usually you wouldn't camp so close to water, but this was such a cool spot I couldn't help it. Plus it was on a fairly busy trail, in good weather, so.. 🤷‍♂️

Swing your legs out one side, stand on stones. The other side? Stand in water 😅

Usually you wouldn't camp so close to water, but this was such a cool spot I couldn't help it. Plus it was on a fairly busy trail, in good weather, so.. 🤷‍♂️

This is a lightweight wool shirt, smartwool brand. I think it's 90 or 100 percent wool, I forgot to photograph the tag.

I use it as a base layer while camping, so looks aren't that important, but I don't want it to fall apart.

I got a couple of snags on my last trip, and I poked most of them back in without issue, these two were bigger and I tried stretching the fabric slightly to pull them in. I did it gently, but they both broke 🫠

Should I use a patch? Or sew a few loose stitches to hold things together? Or just leave it alone?

The underside of the shirt is bright orange, the hole is only the top layer, if that makes sense?

Thanks!

I loved this glass bed. After so much time trying to get anything to stick to the stock ender 3 bed, this glass bed has things sticking almost TOO well.

It was fine enough for PLA, but I've been playing with PETG lately and it sticks a little harder.

Well today I printed the entire bed flat for a little hiking table I'm experimenting with.. and this happened when I tried to get it off...

Suggestions for replacement? Should I go glass again? I don't have bltouch so I like how flat glass is, set it and forget it. But I've seen those magnetic plates that allow for super easy removal but just flexing the plate, but this bed is aluminum I think. Plus that seems similar to the stock ender 3 plate that I despise.

I made this test block to test the fit on some holes (my printer isn't calibrated), when I noticed the problem. The cone on the side was a sanity check for this problem.

I tried googling but couldn't come up with this same problem.

Edit: I did just figure out a way, I made them a union group, which applied the cuts immediately, and they stayed when exported. I’ve never had to do that before. Though admittedly that's probably the right way, I normally use fusion360. Something is definitely weird though. It should just work without doing that. And in fact it did a few days ago on a different project file.

The screen swap was easy peasy, the hardest part was getting the old screen out. Mine was already broken, and I wasn't keeping the front plastic, so I didn't have to worry about being too careful, except around the top edge where the mics and ambient light sensor are.

The case swap was a bear, took forever. I'm fairly handy, but the whole process took almost 4 hours. My buddy was doing his in tandem with me and he was over 5 hours, and that's with me lending a hand towards the end.

It looks great, in my opinion, and I'd do it again, I'd just start earlier in the day 😬

As far as the OLED goes, so far it looks good. The stock brightness slider isn't working, it must be a software thing? I have had zero time to look into it. I haven't even played a single game on it since doing the swap. I'll report back when I have time to give it a fair shake.