hemko

So I got some strange shifting issues with my 105 road shifters (ST-R7020) combined with GRX derailleur (RD-RX812). The cassette is deore CS-M5100-11

Now in theory, and according to Shimano's compatibility chart this should be compatible configuration, despite a little mix-and-match

https://productinfo.shimano.com/en/compatibility/C-454

Now the problems I have screams still for compatibility issues with slightly wrong pull ratios

Going from smallest cog to largest, the first 4 cogs are shifting perfectly. Then the next couple clicks want to over shift and skip cogs, and the largest 3 are shifting perfectly again. In total it takes 9 clicks to go through the 11sp cassette. What fucks my mind over, is the top and bottom cogs that shift perfectly, if the pull ratio was wrong, these would have equal problems?

The most non-dull thing about it was the door could be turned left or right handed, and the door handle can be rotated in 90° increases, pretty cool.

I noticed in the shop that the machine had a door opening to the right, which was strange considering all rest of the dryers and washing machines were left handed. Also the machine at home opens to the left, which is great considering the corner we have it installed

So I asked the seller in shop about it, because the construction of the door seemed like it could be swapped, and he laughed and said it'd be the first time he'd see one where you can swap the door hinge to other side.

We ended up buying the machine and when coming home and opening the manuals, I confirmed my suspicions and disassembled and swapped the door around. Felt like a dad at that moment (until I realized I forgot to install the door seal, and the dryer was already running 😁)

Also I somehow managed to carry it up the stairs and lift it on top of our washing machine somehow without breaking my back, which was nice.

cross-posted from: https://lemmy.world/post/45814289

Discuss

Previous post

Got AliExpress copies from 5dev cranks, and a steel fork for the bike. Also just testing a flatbar on the bike.

The bike feels super fun in "pub cruiser" way, but holy fuck is it dangerously twitchy on trails! Superb fun in the most derogatory way, but I'll throw the drop bar back for now, more comfy on my longish 40k commute

Found some super cheap fulcrum rapid red 900 wheels at 27.5" size, so decided to do the disc brake conversion. Add some mechanical Tektro brakes from parts bin, Kenda tires at 50mm width and sick looking yellow bar tape from local bike store, 12->10mm axle conversion and we have some absolute beauty here supported by Mezpils lager from Latvia

I have some shifting problems to solve, also the disc brake conversion kit from bezos doesn't really work all that well but those are all probably solvable issues. Might start into looking to weld a disc brake tabs to the frame :s

Previous post

Since the last Post I grabbed some cheapo alu forks and cranks for 1by setup, and the bike is starting to feel great. I had a weekend trip with brother in law and realized I really wanted to add then some proper panniers and aero bars for more comfort over longer distances.
Oh, and replaced the old tiagra derailleur with a grx, works great with tiagra 4700 shifters

Photo from the trip

Now also considering throwing in some 27.5" gravel wheels with 40mm-ish tires and disc brake conversion, but not sure if I want to commit on that yet.

YT Industries GmbH has initiated a legal restructuring process under German law, entering into self-administration to secure the company's future.

In a press release from YT Industries, the German-based brand said "despite strong global growth and a loyal customer base", it has been "severely impacted by the global discounting battle in the bike industry, problems with suppliers and uncertainty in the US market related to tariff policies." YT Industries said it was "compelled" to enter legal restructuring proceedings under self-administration as the company has "no further funding available under the current structure."

Markus Flossmann, founder and CEO of YT Industries, said it was "not an easy step for YT, but a necessary measure to actively shape the future of the brand." Flossmann added: "We are already in discussions with potential new partners and are confident that we'll be back on track soon."

Currently, YT Industries remains fully operational with business continuing as normal during the restructuring process. Customer service and warranty support continue to be available and new product launches are still on track to launch in the coming months.

For any further support, YT Industries said its customer support can still be reached through email and the North American entity of YT is unaffected.

cross-posted from: https://lemm.ee/post/61219989

Jack Dorsey and Elon Musk would like to ‘delete all IP law’ | TechCrunch

Jack Dorsey, co-founder of Twitter (now X) and Square (now Block), sparked a weekend’s worth of debate around intellectual property, patents, and copyright, with a characteristically terse post declaring, “delete all IP law.”

X’s current owner Elon Musk quickly replied, “I agree.”