csm10495

At first I thought it was a federation issue of some sort but then realized voyager was working fine.

I can't load: https://sh.itjust.works/post/31973594 via Sync. No idea why.

Sync is my favorite Lemmy app, but come on can we at least get some bug fixes once in a while?

Still waiting for them to respond after i sent it.

Edit: This is of course Comcast/Xfinity.

This video was a lot of fun to watch. It's a simple enough concept that kept me entertained throughout.

It seems like no matter how I scroll I find bad news. I know lots of things are happening but I just want funny memes and interesting stories.

I used to be able to get this back in the day on the Reddit app feed, but here the all page is always just depressing stuff. Back then, there was news and stuff but like it felt more balanced in the all feed. I could get bad stuff but lots of interesting stuff too .

I find myself engaging less and less and just avoiding Lemmy more and more since I know the moment I open it I'll get whacked with more depressing stuffs.

I don't want politics or world news or really even memes about that stuff anymore. Heck even tech news is depressing. I just want simple scrolling of fun content. Idk it's just hard to describe.

Does anyone else feel this way about their Lemmy experience?

I remember an old post about someone getting AM radio from their sink (probably from Reddit back in the day). That type of stuff is so much cooler than my feed.

To that end: any recommended active communities on Lemmy with that type of stuff?

Hey folks,

I'm not sure what I'm doing wrong. I'm printing PETG (https://kingroon.com/collections/petg-filament?) on my Neptune 3 Plus. It's sort of like it starts (almost) ok, sticks to the plate just fine, then a few layers up it seems to almost have inconsistent extrusion (or maybe even trouble pulling the filament?) leading to holes, etc. till the model just falls apart. See linked photos for about where I give up each time.

I'm printing with Cura and 240C printing, 90C on the build plate. 45mm/s (I've gone down from 60mm/s). Retraction on, no z-hop. 60% fan, though I've tried it with 20% and 100% fan as well.

The filament is in a dryer at 55C. Funny enough I printed basically perfectly (without drying, straight out of the bag) with default settings the first time I printed. The second time and on, have had this problem... and have had it in the dryer.

Any ideas would be much appreciated. Thanks!

Edit: In case its useful, I'm printing this piece: https://file.io/D9jxYq4KOrL7 which is a small remix of a piece from https://www.printables.com/model/130507-bolt-action-pen-for-pilot-g2-cartridges

For example, I opt out of all emails from a website. A year later they make a new newsletter and auto subscribe all to it.

I login, hit unsubscribe, then report as spam in my email client.

I figure auto adding me is more/less spamming me. Do y'all agree?

At one point I thought that if the Government was giving money for EV chargers, they would be either at-cost or free to use.

One of the first built was at a Flying J truck stop in Ohio.

I looked on plug share and found one in Hubbard, OH and it's 67c per kwh (https://www.plugshare.com/location/582660). The average cost of electricity in that area is less than 15c per kwh. At that kind of price, gas could be a cheaper option.

Why does the government subsidize in a way where already wealthy companies get public money to build chargers, and make a ton more money off the rest of us?

(This is not a political statement at all. I just don't understand why public money goes to make certain private folks more wealthy. I figure I must be missing something).

Thanks for your thoughts!

Anyone having a new issue where swiping from the left to go back to the thread list from a thread doesn't load properly and instead shows a black screen for a second or so.

Screen recording: https://imgur.com/a/bvzkyfu

All animations in the settings are enabled.

So I was using a wood sealer (https://www.amazon.com/dp/B01AQTX3XU) on my newly built catio. Unfortunately I didn't notice how much I had sprayed on the adjacent window.

Now I have cloudy/foggy windows (https://imgur.com/a/TKD9wim). I've tried cleaning them with:- - - -

• water via the hose directly on the window.. very little progress
• windex.. very little progress
• dish soap followed by host.. very little progress
• vinegar.. very little progress

Any ideas for what might get this stuff off easily?---

I wouldn't be as worried about them going out of business and me being stuck with half broken car software.

Obligatory: this was yesterday (1/20/24)

In the US 1/20/24 was the last day to buy stamps at the old postage rate. The flat rate for postcards was 51 cents and was going up to 53 cents the next day.

They have a concept called forever stamps for regular letters and a similar thing for postcards. If you buy them today at today's price, you can use them at any time in the future regardless of price increases. So if you'll mail letters or postcards, they're a good deal and future investment.

So anyways we ran to the post office at 4pm. The office was closed except for the self service machine. We need about 90 postcard stamps so I figured I'd get 100 to have some extras for the future.

I was so excited to see postcard stamps for 51 cents. I took a picture: https://i.imgur.com/M997Nfg.jpeg

So we bought 100, which happened to be the most we can buy at once.

At that point the machine began printing 100 individual 51 cents stamps.

Now you may have noticed the issue: it wasn't 100 postcard stamps, but rather 100 stamps each saying 51 cents of value.

It took a long time as each stamp was printed one by one, but I got to stand there sad as I didn't get my forever postcard stamps.

Now to mail my postcards, I'll need to buy 2 cents of postage each (or more when it goes up again). I'll be more careful next time.

Tldr: I bought 51 cent stamps instead of postcard stamps for 51 cents.

Edit: commented with an update after a few days.