Pogbom

Hello!

It looks like the builders never installed J-channels around the windows, and we've noticed some water coming into the house through the window frame during heavy rain and wind. The internet tells me it's possible to slide some J-channel under the existing siding but I can only find videos on doing it before the siding goes on.

Any help would be appreciated :)

Edit 1: this only happened one during a very intense rain, not all the time.

Edit: Figured I'd update in case it can help anyone. I got in touch with someone to come take a look, and it turns out these windows have built-in J-channels so that wasn't the issue at all.

The problem was where the house wrap actually went behind the window, making that J-channel useless basically. While it was still taped across, that's really the only place water could have come in so there must have been a gap in the seal. So he sliced the wrap, inserted another barrier under it and layered it so that water could never get behind it again.

Also confirmed no water damage/stains around the windows so it's likely all the water that came in was caught inside by our towels.

You can hear the flush in the beginning, and a few seconds later a loud knock under the sink area. If I understand, water hammer is from the incoming water stopping suddenly and moving the pipes, but this is definitely elsewhere along the outflow.

Worth mentioning this only happens with solid waste and liquid doesn't do it. Kinda sounds like the outflow pipes are knocking against something when there's bulk in there.

Does this sound kind something to be remedied? Thanks for your help!

It's completely loose (can move a few inches up and down) and rattles on the muffler while driving. Easy fix for a noob, or should I take it in? And uh... how urgently? 😂

Feel free to roast me if this is idiotic. Thank you!

They've got 98,000 KM (60,894 miles) on them and I figure this was pretty much my last summer on these anyways. Time for a new set? Thank you!

Hi all,

I accidentally bumped into this charger and now the bottom prong in this picture can wiggle left to right (relative to this angle). I wanna say it moved about 10° from its original position and you can see the bunched up plastic from where it moved.

I bent it back into position and it's still very stiff... just wondering if it's still safe to use.

Thanks for your help!