Dull Men's Club

I don't disinfect my blades, just replace them about once a week. It cost me around $13 for 100 replacement blades so could easily replace more regularly and not stress about cost. The quality of shave improves with time as you learn the contours of your face, whisker grain etc. I'm told different brands and models of safety razor give varying degrees of closeness too, but can't comment as I've only ever used one. An alum stick or styptic pencil is a worthwhile investment, as it helps stop nicks from bleeding too much and calms skin irritation. I find it to be an infinitely more enjoyable experience over using a disposable razor.

I've been shaving with a safety razor and a straight razor for well over 20 years at this point. What works for me doesn't necessarily work for others, and our skin/hair is all of different needs and consistency. So grain of salt here.

When you start using a safety razor it takes both practice, and time for your skin and routines to start to adapt. It goes pretty quickly, and you'll find your shaves get better and better every time for the next month or so. I shave usually 3 times a week, sometimes more depending on what's going on, and I use my safety razor probably 95% of the time. I don't disinfect it or really do much of anything to it, it's very unlike the straight razor (which is an entire production - it's a rewarding shave but it's slow and you have to do some work to your blade pre/post shave). I also am lucky enough to have facial hair thats pretty soft, so I can go a month to a month and a half without changing the blade, depending on what brand of blades I'm using. I do find the feather blades to be better than most, but I also have had decent enough luck with Derby blades, and they are much cheaper. Find what works for you, try to get your hands on a few different manufacturers and try them all out as they all have some differences.

Get a stand, and get a brush. I prefer shaving soap, but good soap or creme is a must. While you are showering, soak your brush in a bowl with warmer (but not scalding hot) water. Be generous with the shaving creme, make a big ol mess, and learn to enjoy the process. Biggest tip, is to not apply any force at first. Let the weight of the razor do the work (that's why it's so heavy). Also just do two with the grain passes at first, until your skin adapts, and it will quickly. I do a first past with the grain, second rep is against the grain, third is again with the grain. That's what works for me.

I don't bother disinfecting the blade beyond a rinse between shaves. I'll definitely clean the razor a little between blades though.

As others have said the stubble thing will improve with practice. If I need an insanely close shave for some reason though I'll do a second shave "against the grain". So if normally I shave from my temple pulling down to my chin, with the handle down next to my chin, I'll flip the whole thing. I'll pull from my chin up to the temple, with the handle up next to me temple.

Again that's only on occasion when I need true glass smooth.

Here's a few words of self-proclaimed wisdom: use soap or cream with a decent brush. Avoid the foam or the gel. Soap does not have to be expensive. If you live in or near Germany, buy the Palmolive stuff. It's dirt cheap and works well.

Your choice of blade is personal. I personally love the Feathers or green Astras and avoid Personna or Lord like the plague. Some Gillette blades are quite decent too (I like the ones you buy in France). Some shaving shops offfer starter sets with multiple brands.

When you shave, do at least two passes: one with the grain and one across the grain. Some people do against the grain as well, but others prefer not to due to ingrown hairs.

Finally, there is a nice wet shaving community with its own lemmy instance. It is a nice community.

Welcome to the world of wet shaving! A few comments: To avoid stubble, I'll do a second round of shaving. Once I've shaved, I'll slap on another layer of shaving soap and do it again.

Also, blades make a huge difference. I've been using Feather blades - I think they're manufactured in Japan - for about a decade now and they're sharper and smoother than anything else I've tried. Avoid Crystal brand.

One thing I haven't seen mentioned is safe disposal. You'll need to pick up a razor blade slot for the house (landlord probably wouldn't be happy): https://maggardrazors.com/products/maggard-razors-blade-bank-used-blades-lifetime-wall-slot

Definitely my preferred mode of shaving. I got one from Henson since they’re Canadian, been loving it the last few years. They also sell a big pack of blades for dirt cheap and they work really well. Highly recommended.

I switched to a safety razor about a year and a half ago. I'll never switch back to a cartridge razor. I agree, your skin probably still needs to get acclimated to the new razors. I use very little gel now and my shaves are very similar to a Gillette. I only rinse mine and blow it dry and my razors last for a few weeks, I don't disinfect.

You should be able to get a stubble-less shave with more practice. It might be the angle you're using it at, but could be the design of your particular tool.

I got into "wet shaving" a couple years ago. I still have all my stuff and still occasionally use my safety razor. I've also upgraded my kit with a straight razor so I can get really nice straight beard/necklines if I want to put in the effort.The straight razor uses the same disposable blades so it's very convenient. I don't go all out every day, there's a lot of technique involved and I usually just clean up my neck with a cheaper razor. But it's nice to have the kit to pamper myself if I want.

I'd disinfect before/after every use personally but I don't use mine every day. It's pretty simple, just soak it all in some isopropyl alcohol for a few minutes then wipe everything down. The blades are dirt cheap so there's no reason to hang onto them, they start dulling pretty quickly.

Enjoy the shave! It can be a pretty wholesome, meditative experience, may your blades never be dull.

This is crazy. I was just thinking about these razors in the shower about ten minutes ago.

Can I ask you something? Do you think they'd be good for manscaping?

First, Welcome to the club! I'm old and my very first razor, (I still have it and shave with it), is a Gillette slim Adjustable that I've been using for 50+ years.

There is a seemingly a lot to learn about DE shaving. And your Daddy and Grandpa can't teach you about it anymore. I'm going to recommend you peruse Badger & Blade. They are very welcoming to everyone about "wet shaving" as they refer to it. And they are more than happy to guide you on your way to a happy shave that fits your face. Warning: RAS (Razor Acquisition Syndrome) is a real thing. And you can quickly find yourself with a stable of different razors and an addiction of wanting ALL the razors.

The advice I will give here are 3 things.

While I'm proud of you for venturing into a better shave, your first razor is a TTO (twist to open) and cheap ones tend to fail very quickly. I would tell you that a 3 piece razor is far sturdier and longer lasting and not much more expensive considering they can last a lifetime or more. If you search Amazon for 3pc safety razors you can find them. QShave is pretty good (I have one of them) and the Parkers are a staple. But pick the one you like.

Razor blades are very much a YMMV that depends on your razor and face for the best and most comfortable shave. And you will need to get some sample packs to try different brands and blade types. So don't buy 100 of them until you know what you like and don't like. Badger & Blade can get you started and someone may even send you a few of their favorite blades to try because you are new, and they want you to succeed.

To get a BBS (baby butt smooth) shave mostly requires you to do more than one pass depending on your beard type. Generally for the closest shave, 3 passes are done. First pass is shaving downwards. Second is across the face. And the third is upwards. You may even need to retouch certain areas of your face also. I do that if I need that BBS shave. But it's up to you to decide how many passes you want to do when you shave.

Bonus: Shaving with brush and soap.

You do NOT need to go this far. But you will eventually be lather curious. Know that there are good vegan choices in brushes and soaps. There are some very excellent synthetic brushes that rival the finest badger hair made, and they are not expensive. And while tallow based soaps are often the grail for many shavers, there are very good vegan approved soaps too.

Good Luck in your journey!

Main thing is to make sure its tight. I generally only have cut myself when I did not have it tight and that mostly happened in the begining before I realized that was what caused me to get cut. I actually use one disposable a year to get it a bit closer for things like job interviews or special occasions. day to day it gets close enough. not smooth as a babys but but visually its fine.

Safety razor was the best thing I ever did for my shave.

Well, buying good quality shave soap to go with it made the biggest difference for my skin.

A few tips:

• I always take my blades out and dry them so I can get a few more uses out of them. I don’t disinfect.
• when I put a blade away, I wrap it in paper and use a permanent marker to add a tick mark, it helps me keep track of how much I’ve used a blade and when to get a new one. Permanent marker is more water safe so it doesn’t wash out.
• use the best possible shave soap you can. It lasts a long time. There are vegan brands, I use Badger, it’s great on my skin.
• buy an alum block or pencil, they help close up nicks.
• use a blade bank to safely dispose of your blades! It’s much safer.
• try out a ton of blades to find your brand. Everyone’s hair and skin is different. The commonly recommended blades don’t work for me, or some work but have a waxy seal I don’t like. Buy a variety box and experiment!

You can reuse your blades but make sure it's properly cleaned before storing, also make sure there's no rust on it, same goes for razor. As for the blades https://myblades.com/, best blades I've used.

I got a Henson Razor.

https://www.amazon.com/dp/B0B6QJY4Z2

Blah blah, aerospace engineering precision crafted etc etc. It's not bad, but I'm only old and not an expert. See what the others say about it and maybe consider getting one.