this post was submitted on 27 Jul 2026
38 points (100.0% liked)

Homebrewing - Beer, Mead, Wine, Cider

2988 readers
17 users here now

A community dedicated to homebrewing beer, mead, wine, cider and everything in between. If it ferments, bring it over here.

Share recipes, ideas, ask for feedback or just advice.


Some starting points for beginners:

Introduction to Beer Brewing

A basic mead primer

Quick and diry guide to fermenting fruit - cider and wine

Brewing software


founded 3 years ago
MODERATORS
 

some of my favourite IPAs either straight "IPA" or WC / NE specific styles are the ones with rich, full bodied, malt flavours. now' i;ve done a few NEIPAs with Golden Promise, MO and other standard pale malts, including basic extra pale malt but with lots of caramel/crystal additions and i've just never gotten the flavours I want out of the malt backbone.

so this was based on some pro brewers mentioning IPAs built on vienna and munich, with a caramunich II for a hint of extra depth and a more amber colour as a base for big full bodied higher ABV IPAs, so I scratched together this recipe as a bit of an experiment to see what it does.

I also forgot an ingredient in the grist (GNO, goes in everything honestly!) on brew day when the boil was already underway and I didn't want to try to cool back down and re-mash the missing ingredient so I quickly calculated how much DME I needed to make up for it, didn't have enough in stock so I cut it with some brown sugar and overshot the gravity but whatever, it was going to be a normal-ish gravity now it's a double.

What I ended up brewing was this:

Malts (5.5 kg)

4.2 kg (76.4%) — Gladfield Malt Gladfield Vienna Malt — Grain — 8.2 EBC

800 g (14.6%) — Weyermann Munich I — Grain — 15 EBC

300 g (5.5%) — Gladfield Malt Gladfield Chit Barley — Grain — 3 EBC

200 g (3.6%) — Weyermann Caramunich II — Grain — 124 EBC

Other (750 g) - cause I forgot 500g of GNO and had to improvise.

500 g — Extra Light Dry Extract — Dry Extract — 5.9 EBC — Boil

250 g — Brown Sugar, Light — Sugar — 15.8 EBC — Boil

Mashed at 67c for an hour, 77c mashout for 15 minutes, 1 hour boil. Post Boil OG was 1.071.

Hops are mostly Aussie hops in the standard WC flavour profile. made it up as I went along but this is what I ended up with:

  • 5 g (11 IBU) — Vic Secret 18% — First Wort
  • 5 g (7 IBU) — Ella (aka Stella) 16.3% — Boil — 30 min
  • 25 g (14 IBU) — Chinook 13% — Boil — 10 min
  • 20 g (16 IBU) — Vic Secret 18% — Boil — 10 min
  • 50 g (8 IBU) — Vic Secret 18% — Boil — 0 min
  • 50 g (8 IBU) — Vic Secret 18% — Aroma — 20 min hopstand @ 75 °C
  • 20 g (3 IBU) — Ella (aka Stella) 16.3% — Aroma — 20 min hopstand @ 75 °C
  • 75 g — Vic Secret 18% — Dry Hop — 2 days
  • 50 g — Ella (aka Stella) 16.3% — Dry Hop — 2 days

Piched a new yeast to try, Cellarscience West Coast, which might have needed 2 packs due to the higher gravity in hindsight, but it's going happily, just a bit slower than I’d expected. I always add yeast nutrients and dont worry too much about trub in the fermenter so there’s plenty for the yeast to munch on.

Currently it's about 7 days along at 17c and has come down to 1.021, it will get another 2 days at 17 then a few days at 21 just to drive off whatever else it can do and help clean up any potential off flavours. I was originally planning on a 1010 finish but I think I mashed a bit hotter than planned and it might not get below 1016, but that's perfectly fine for a big IPA that is trying to be rich and full bodied.

The Dry hop will happen after that at 14C for a couple of days, then since this is going to be at risk of hop burn it will get a solid week at -2c for a good cold crash before kegging.

Picture was 5 days into fermentation, still a lot of activity. it was near black when it went in, but it's turning more orange/amber as it goes. final colour target is 17.5 EBC, so a nice amber, and should be quite clear by the time it's in a glass.

Wish me luck, I will report with the finished product later.

top 3 comments
sorted by: hot top controversial new old
[–] Leeks@lemmy.world 2 points 2 days ago (2 children)

Where did you get that carboy?

thats a fermzilla rig.

[–] SpruceBringsteen@lemmy.world 3 points 2 days ago

Guessing that's a Fermzilla