3DPrinting
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: or !functionalprint@fedia.io
There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml
Rules
-
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
-
Be respectful, especially when disagreeing. Everyone should feel welcome here.
-
No porn (NSFW prints are acceptable but must be marked NSFW)
-
No Ads / Spamming / Guerrilla Marketing
-
Do not create links to reddit
-
If you see an issue please flag it
-
No guns
-
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
Moderation policy: Light, mostly invisible
view the rest of the comments
You don't want multiple layers as it will lift and cause adhesion issues. The action of heating and letting it cool once is stressful enough on the material. When you create a second heating, while there is a temperature gradient present already, that will create the stress that lifts edges.
Really dial in your first layer settings. The hack is to just use elephant's foot for the first layer, but you are not actually dialing in your flow and squish. If you take the time to dial in the first layer well, your supports base layer removal should improve. It is possible to get a first layer printing like glass.
Also, you may have a setting to increase the bed probe resolution. That may help if the first layer is not even.