3DPrinting

20347 readers

123 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: or !functionalprint@fedia.io

There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml

Rules

No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts

If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 2 years ago

MODERATORS

j4k3@lemmy.world

andypiper@lemmy.world

GrayBackgroundMusic@lemmy.zip

Crappy filament? (lemmy.world)

submitted 1 week ago by idunnololz@lemmy.world to c/3dprinting@lemmy.world

16 comments fedilink hide all child comments

Not sure if anyone has seen this before but I bought two spools of PETG from Elegoo, one in white and one in black. Their regular PETG, not the rapid one.

Yesterday I printed with the white spool and it worked pretty well.

Today I tried to print with the black spool and the filament would not come out of the nozzle. I tried diagnosing the problem and ended up swapping nozzles, taking apart the nextruder and putting it back together. Then I tried printing again and again the filament would not come out. I swapped back to the white filament because at this point I've essentially ruled everything out except the filament and the white filament worked. I then tried the black again and it would not print. I cut off about 10cm of the filament and tried again and same issue. Finally I cut off about another 50cm and now it started to print.

I'm not sure if this has happened to anyone else or if anyone knows what the issue is. It's almost as if the filament refused to melt or had an much higher melting point vs the rest of the spool.

you are viewing a single comment's thread
view the rest of the comments

[–] Test_Tickles@lemmy.world 1 points 1 week ago (1 children)

I wonder if the end of the spool got annealed somehow? Maybe while being spooled? Or if it was at the end of a run it could have spent too much time in the extruder?

[–] idunnololz@lemmy.world 1 points 1 week ago

It was a brand new spool so the extruder idea is probably out. Also I tried cutting 10cm off of it which should be long enough that it would be too far away from the extruder anyways. I was also using Prusa's default profile which heats the nozzle to 250 C! Anyways I'm glad I figured it out. Next time I suspect a nozzle clog though I'm going to try swapping the filament as well before I do something major like take apart the extruder.